You pull into a station selling 93 with several gallons of 91 still in the tank. Can you fill up? For a vehicle that permits both of those compatible unleaded pump fuels, mixing them is ordinarily a normal top-up. The important checks are the vehicle’s minimum octane, ethanol limits, and any tune requirements. A blend calculation helps describe what is in the tank; it cannot approve a fuel combination the vehicle’s instructions do not allow.
Start with the minimum your vehicle requires
Read the manual for the exact model year and engine. Required octane and recommended octane are different. One Ford owner-manual example requires a minimum of 91 and identifies 93 or higher for optimal performance. That illustrates why seeing 93 in the instructions does not always mean 93 is the minimum. Other vehicles can have different requirements.
If your vehicle permits 91, compatible 91 and 93 pump gasoline can be used together while staying within its other fuel limits. If it requires 93, do not treat a mix containing 91 as equivalent to a tank of 93. For a modified car, verify the installed calibration and fuel requirements with the tuner. A stock manual alone may no longer describe the engine’s needs.
Use a volume-weighted estimate
The basic estimate multiplies each fuel’s octane by its volume, adds those results, then divides by total volume:
Estimated octane = [(gallons of 91 × 91) + (gallons of 93 × 93)] ÷ total gallons.
Sunoco’s blending explainer describes a weighted average as a way to get fairly close. Treat the answer as approximate. You can use liters instead of gallons if both amounts use the same unit. Do not put one volume in gallons and the other in liters.
Also compare the same octane scale. Sunoco’s octane-rating explanation identifies the average of RON and MON, shown as (R+M)/2, as the U.S. pump standard. A RON-only number from another market is not interchangeable with a U.S. pump number.
What half 91 and half 93 gives you
Equal amounts of 91 and 93 produce an estimated 92 octane. For example, five gallons of each gives (455 + 465) ÷ 10 = 92. Here are three illustrative ten-gallon combinations:
| 91 octane | 93 octane | Estimated result |
|---|---|---|
| 7.5 gallons | 2.5 gallons | 91.5 octane |
| 5 gallons | 5 gallons | 92 octane |
| 2.5 gallons | 7.5 gallons | 92.5 octane |
These calculations describe proportions, not laboratory-tested fuel grades. Under this averaging model, any amount of 91 holds the result below 93. Using only 93 is the only way a 91-and-93 calculation reaches 93. Adding more 91 never raises the estimate. Our 91 versus 92 versus 93 guide explains how those numbers relate to choosing a premium grade.
Cost can be estimated separately. Suppose 91 costs $4.20 per gallon and 93 costs $4.40: five gallons of each cost $43, or $4.30 per gallon. These illustrative prices explain the math, not current station prices. The saving only matters if the resulting fuel is appropriate for your vehicle. Compare the total purchase with buying an allowed grade directly, including any extra driving needed to visit another station. Keep the receipt and record what was already in the tank if you want to reconstruct the estimate later.
Include the gasoline already in the tank
The most common mistake is calculating only the new purchase. Suppose your tank contains four gallons of 91 and you add eight gallons of 93. The estimate is [(4 × 91) + (8 × 93)] ÷ 12, or about 92.33. The receipt says 93 because that was the fuel dispensed; the estimated contents of the whole tank are different.
A fuel gauge is not a precise gallon measurement. If you are unsure of the remaining amount or previous grade, the output inherits that uncertainty. Try several plausible starting amounts in the Find93 octane mixture calculator to see how much the estimate changes. Do not turn a rounded result into a claim that you have met a strict minimum.
Understand what the arithmetic cannot certify
Real octane blending can be nonlinear. Sunoco’s technical explanation of fuel mixing cautions that fuel properties do not always combine as expected, with ethanol making the behavior more complex. The simple formula does not model the chemistry of your particular batches of gasoline.
A decimal display can look more certain than the inputs deserve. An estimated 92.333 is not proof of a measured 92.333, and a calculator does not provide a warranty guarantee. Where a vehicle or tune requires a particular grade, use fuel documented to meet that requirement rather than aiming at the boundary with a home calculation.
Check ethanol compatibility separately
The octane numbers do not tell you the ethanol percentages. Read the pump labels and the vehicle’s approved limits before combining fuels. The Department of Energy’s ethanol-blend guide distinguishes E10, E15, and E85; E85 is intended for flexible-fuel vehicles. Higher octane does not make an otherwise incompatible ethanol blend acceptable.
This everyday 91-and-93 estimate is not a recipe for adding E85, race fuel, or octane boosters. Those products introduce additional compatibility and formulation questions. If an unsuitable fuel is already in the tank, contact the manufacturer or a qualified service professional for guidance specific to the vehicle and amount involved.
Plan the stop before the tank runs low
For routine top-ups, choose compatible fuel meeting the vehicle’s minimum and use blending estimates for understanding the tank. When 93 is required, locate it early with the Find93 map, keep a backup station in mind, and confirm availability at the pump. The Find93 app makes the station search convenient while planning a drive. Enough remaining range gives you a practical alternative if the first stop cannot supply the grade you need.
